D70E

General Description

The D70E is an electronic terminal for general purpose applications equipped with serial RS232/422 and Ethernet communication ports TCP_IP. The unit has a large 20 mm high intensity LED display and membrane keypad, and combines an exceptional quality-price ratio

Applications

Designed for applications where a clear and concise weight reading is required combined with the ability to print the results with a date and time stamp and interface to a higher level system the results

Characteristics

-Date and time

-Progressive number of the weighing (resettable)

-Gross weight, Tare, Net weight

-Auto tare or preset tare function

-Piece counter function with the possibility of printing the number of pieces counted

-Weight value transmission via a serial port or ethernet interface

-Indication of battery charge status (if available)

-Partial total, general

-Reset

-Tests

-Display of: Gross weight – net weight, number of pieces and average piece weight (when counting is enabled)

-Battery operation: 6 x 1.2 V recheargeable AA batteriesor 6 x 1.5 V AA alkaline batteries, with 16 h run time (single loadcell)

-Power supply: 110-240VAC with external adapter

-Low voltage power supply: 12 Vdc

-Panel protection rating: IP65

-Integrated Ethernet TCP-IP communication port

-1xRS232/RS422 serial port(for printer, PC, remote display connecton)

-7-segment red LED light high intensity displar, digits 20 mm hight

-7-key membrane keyboard

-Facility for operation as a weight “repeater” interface via Ethernet or serial port RS232/422

-Operating temperature °C: –10 / + 40

-Storage temperature °C: -20/+70

-RH % (maximum non-condensing relative humidity): 85%

-Load cell power supply: 5 Vdc

-Maximum number of load cells: 4×350 ohm or 8x 700 ohm

-Maximum load cell input power: 15 mV

-6-wire connection with “Sense” circuit

-Max. resolution (for “approved use”): 6000 div. OIML (2×3000)

-Max. resolution (for “internal use”): 30000 div.

Legislation

Approved for weighing operations for the purpose of Commercial transactions according to directive 2014/31/EU.

Carrying the CE mark of approval in compliance with directive 90/384 EEC, this indicator can be connected to any type of analogue load cell in Single Scale or Multirange versions

Options

-Rechargeable NI-MH (AA) batteries kit

-MPP alibi memory